Explore IMO Emission Control Areas and check whether a vessel position is inside an ECA.
Regulatory review: 2 October 2026. Canadian Arctic and Norwegian Sea designations are in force; their 0.10% sulphur limit applies from 1 March 2027. NOx criteria are shown separately.
Important Notice: Always consult the vessel’s local port agent and the latest official regulations for applicable ECA/SECA requirements, fuel changeover requirements, local restrictions and port-specific environmental rules.
This interactive map is provided for training and general guidance purposes only and must not be used as the sole source for navigation, regulatory compliance or operational decision-making.
This map covers seven IMO areas only. For China, South Korea, Australia and other national or local restrictions, use the Worldwide ECA / SECA Reference. An outside-map result does not exclude stricter local requirements.
Check Vessel Position
Decimal degrees or 35°56.25'N 014°22.52'E. Paste a full pair into Latitude with Longitude empty. Device location is optional and may be inaccurate or spoofed. Verify independently.
The map loads when visible. Area information is available below.
For reference only. Always verify ECA boundaries, applicable requirements and fuel changeover requirements against the latest official IMO, MARPOL, Flag State, coastal State and nautical publications.
NOx requirements apply only to qualifying ships and engines. No NOx-only area is included. Coloured shading follows official offshore definitions with a generalised coastline. Use area selection or cards for keyboard access.
VESSEL STATUS
Enter a position or use your current position to begin.
Operational compliance must be independently verified. This tool does not assess a ship's engine certification, approved equivalent arrangements, local port rules or separate Arctic fuel restrictions.
ECA Fuel Changeover Reminder
Enter all times in UTC. The sulphur limit is evaluated for your planned entry date, from 2 October 2026 onward. Historical limits are not assessed. This reminder remains on this page; it does not send an alarm when the page is closed.
Fuel changeover must be completed before entering the applicable SOx ECA in accordance with the vessel's approved procedures. Follow MARPOL Annex VI regulation 14.6 on written procedures and records. No engineering changeover duration is calculated.
IMO ECA information
SECA commonly refers to a sulphur emission control area. The Mediterranean SECA controls SOx and particulate matter; the other six areas also have ship-specific NOx Tier III requirements. Particulate matter control does not introduce a separate numerical fuel PM percentage.
Baltic Sea ECA
SOx / NOx / PM
Baltic Sea proper, Gulf of Bothnia, Gulf of Finland and entrance bounded by the Skaw parallel, 57°44.8′ N.
SOx / PM sulphur limit
0.10% m/m from 2015-01-01
Designation / initial measures
2006-05-19
NOx
Ships constructed on or after 1 January 2021, subject to regulation 13 scope and exceptions.
Regulation
MARPOL Annex VI regulations 13, 14 and 14.7
The Baltic and North Sea have separate SOx and NOx application dates.
Canadian Arctic waters defined by the coordinates in appendix VII to MARPOL Annex VI.
SOx / PM sulphur limit
0.10% m/m from 2027-03-01
Designation / initial measures
2026-03-01
NOx
Tier III applies to qualifying ships constructed on or after 1 January 2025, once the designation is in force.
Regulation
MARPOL Annex VI regulations 13, 14 and 14.7
Designation entered into force on 1 March 2026. Regulation 14.7 gives a 12-month SOx transition; the 0.10% limit applies from 1 March 2027. Separate Arctic fuel restrictions are not assessed.
Norwegian Sea waters defined in MARPOL Annex II regulation 13.9.4.
SOx / PM sulphur limit
0.10% m/m from 2027-03-01
Designation / initial measures
2026-03-01
NOx
Qualifying ships: building contract on or after 1 March 2026; without a contract, keel laid on or after 1 September 2026; or delivery on or after 1 March 2030.
Regulation
MARPOL Annex VI regulations 13, 14 and 14.7
Designation entered into force on 1 March 2026. The 0.10% limit applies from 1 March 2027. NOx construction criteria differ from the Canadian Arctic.
Official offshore coordinates are retained from IMO MARPOL Annex VI appendix VII, MEPC.392(82), MEPC.361(79), and the IMO ECA coordinate tables. Norwegian Sea coordinates are those in MARPOL Annex II regulation 13.9.4, introduced by MEPC.315(74). Baltic and North Sea limits follow the MARPOL geographical definitions. WGS84 geodesic segments join coordinate-defined points; specified parallels remain parallels.
Land and coastal closures use Natural Earth 1:10m cartography, simplified for display. Coastlines, small islands, ports and inland-water limits are not survey accurate. Positions within 5 NM of a mapped coast or 0.5 NM of an offshore boundary require verification. These thresholds are caution bands, not accuracy guarantees. Small islands may be unresolved.
Boundary distance is the approximate spherical shortest distance to the nearest mapped offshore limit, excluding coastlines. It is neither a navigable route nor a distance to the next ECA along your course. The polar-capable map uses latitude/longitude projection, so visual distances are distorted. Use calculated distances for reference only, not for navigation.
This page covers the seven requested ECAs. The North-East Atlantic ECA adopted in 2026 is not mapped here; its amendment enters into force on 1 September 2027, with SOx measures applying from 1 September 2028. See the IMO resolutions register.
The global sulphur limit is 0.50% m/m; an applicable SOx ECA limit is 0.10% m/m. Approved equivalents under regulation 4 and stricter national or local requirements require separate assessment. NOx Tier III scope, engine power thresholds, exceptions and major conversions must be checked under regulation 13.
Regulatory data · Boundary GeoJSON · Source coordinates. Position calculations run locally. No position is sent to this website or a map tile provider. Browser location services have their own privacy terms.
DISCLAIMER
This interactive SECA / ECA map is provided for general information and voyage planning assistance only.
The boundaries, coordinates, regulatory information, calculated distances and effective dates displayed on this website should not be considered an official navigational or statutory compliance source.
Users must verify all applicable requirements against the latest editions of MARPOL Annex VI, IMO publications, official nautical charts, Notices to Mariners, Flag State requirements, coastal State requirements and other applicable regulations.
The vessel's Master and Company remain responsible for ensuring compliance with all applicable environmental, navigational and fuel changeover requirements.
Marine World Clock accepts no liability for any loss, delay, penalty, detention, non-compliance or other consequence arising from reliance on information displayed by this tool.